色散长波方程簇的Hamilton结构

本文导出了色散长波方程簇,并利用屠规彰迹恒等式方法,讨论它们的Hamil-ton结构。     

Viscoelasticity,mechanical properties,and in vivo biocompatibility of injectable polyvinyl alcohol/bioactive glass composite hydrogels as potential bone tissue scaffolds

Abstract

An injectable composite hydrogel composed of polyvinyl alcohol (PVA) and bioactive glass (BG) particles were synthesized by a physical crosslinking approach. The morphology, mechanical properties, and viscoelasticity of the PVA/BG composite hydrogel were characterized. Scanning electronic microscopy (SEM) showed uniform and homogeneous distribution of BG particles throughout the composite hydrogel. The incorporation of 2.5?wt% of BG particles in the composite hydrogel formulations, enhanced the static compressive strength and static elastic modulus by 325% and 150%, respectively. The storage molds (G′) was greater than the loss modules (G′′) at all the frequency range studied, which revealed a self-standing elastic composite hydrogel with a smooth injectability. The PVA/BG composite hydrogel was also implanted subcutaneously in the dorsal region of adult male rats. After 4?weeks of implantation, no inflammatory cells were seen within and around the implant, which indicated that the composite hydrogel was biocompatible. The properties of the synthesized injectable PVA/BG composite hydrogel demonstrate its capability toward bone regeneration.     

运动对去卵巢大鼠骨元素代谢的影响

用测定骨元素含量的方法，分析了运动对正常大鼠和切除双侧卵巢后的大鼠骨元素代谢的影响。将健康4个月龄雌性SD大鼠44只随机分成5组：（1）非去势非运动组；（2）非去势＋运动组；（3）假去势非运动组；（4）去势非运动组；（5）去势＋运动组。运动组用大鼠专用跑台中等运动强度训练，持续10周。结果表明，去卵巢大鼠骨Ca,Mg,S,Mn,Zn等含量显著降低，P含量显著增加。运动训练可使去卵巢大鼠降低的骨Ca,Mg,S,Mn,Zn等含量显著回升，骨P含量显著回降。提示中等强度运动训练可对抗由于去卵巢所引起的骨元素代谢紊乱。     

可降解自固化类骨磷灰石支架的研究

0引言一直以来,钙磷生物材料如羟基磷灰石(hy-droxyapatite,HA)由于其成份与骨的无机成份相似,具有良好的生物相容性,作为骨修复材料引起了人们广泛的兴趣。磷酸钙骨水泥是一类可在生理条件下自固化的非陶瓷型类HA人工骨材料,这种由磷酸钙骨水泥(calcium phosphate cement,CPC)转变而成的HA,与天然骨磷灰石有类似的组成结构,植入人体后可参与新陈代谢,促进骨组织生长[1,2]。一些研究显示,CPC具有成骨活性和生物降解性,在体内被吸收的同时可引导新骨的生成,从而可克服自体骨、磷酸三钙陶瓷因吸收降解过快造成的局部缺陷以及陶瓷型HA长…     

Ce(IV) ion initiated graft polymerization of glycidylmethacrylate onto a demineralized bone matrix: effect of reaction parameters

Studies on chemical modification of demineralized bone matrix (DBM) have opened new arenas in the field of clinical orthopedics owing to its potential osteoinductivity with desired chemical functionality. To widen its usage to biomolecular delivery, graft polymerization of glycidylmethacrylate onto DBM was carried out by a free-radical initiating process using ceric ammonium nitrate as an initiator. The evidence of the grafting reaction was examined by chemical analysis using Fourier transform IR spectroscopy. The grafting condition was standardized by regulating the reaction parameters such as the concentrations of the backbone, the monomer and the initiator, the polymerization temperature and time. The optimum polymerization temperature and time to have the maximum grafting yield were 40 °C and 3 h, respectively. The percentage of grafting and the percentage of grafting efficiency were determined as a function of the reaction parameters, and both were found to increasing initially and thereafter decrease in most of the cases. The grafting results are discussed in a detailed fashion and a reaction mechanism is proposed.     

Hydroxyapatite-poly(d,l-lactide) Nanografts. Synthesis and Characterization as Bone Cement Additives

This paper reports the creation of hydroxyapatite/polyester nanografts by “graft-from” polymerization of d,l-lactide with [Ca₅(OH)(PO₄)₃]₂ as the initiator and tin(II)-2-ethylhexanoate as the catalyst. Model polymerizations were performed with cyclooctanol as initiator to confirm the grafting on the surface of the hydroxyapatite nanocrystals. Polymers with the highest molecular mass (M_n) between 4250 Da (cyclooctanol) and 6100 Da (hydroxyapatite) were produced. In both cases the molecular mass distributions of the polymers formed were monomodal. The materials obtained were characterized by size-exclusion chromatography, NMR and FT-IR spectroscopy, and thermal methods. Their suitability as additives for commercial bone cement (Simplex P Speedset, Stryker Orthopaedics) has been confirmed by thermal analysis techniques and mechanical testing. The results obtained show that addition of the hydroxyapatite/ polyester nanografts improved both thermal and mechanical properties of the bone cement.     

光谱电化学法研究亚甲基蓝的电还原反应

用极谱法研究亚甲基蓝(MB)的电极吸附过程早有报道.近几年,用光谱电化学法研究其电化学行为又引起了许多人的兴趣.但在光透薄层电极上,由于光程太短,测试溶液浓度较高,导致亚甲基蓝发生聚合,影响实验结果的准确测定.为此本文利用特制的比色皿型长光程薄层光谱电化学池,在低浓度条件下研究其在SnO_2镀膜玻璃电极上的电还原反应.     

Electrochemically Induced Iron Release of Adsorbed Horse Spleen Ferritin: Quantitation of Iron Using Long Optical Path Length Thin‐Layer Spectroelectrochemistry

In this work, long optical path length thin‐layer electrochemical cell was constructed using indium‐tin oxide on glass as the electrode material. Iron release from ferritin adsorbed on the electrode was induced by applying a negative potential sweep in the presence of 1,10‐phenanthroline. The usefulness of spectroelectrochemistry as a means of determining the quantity of iron released from an adsorbed layer of ferritin is demonstrated.     

Proteomic analysis of a spring wheat cultivar in response to prolonged cold stress

Cold represents one of the major abiotic factors influencing plant growth and development worldwide. We analysed the long-term responsiveness of an Iranian spring wheat (cv. Kohdasht) to cold from a proteomic point of view, in order to unravel the molecular mechanisms helping a cold-sensitive cultivar to survive exposure to suboptimal temperatures. Plants were grown at 20 or 4°C until entering the reproductive stage and a cross-comparison on the leaf proteomes was performed. Quantitative analyses on protein alterations occurring upon low-temperature exposure showed a reinforcement in ascorbate recycling (dehydroascorbate reductase, ascorbate peroxidase) and protein processing (proteasome subunit, cysteine proteinase), as well as the accumulation of the enzyme devoted to tetrapyrrole resynthesis (glutamate semialdehyde aminomutase). In contrast, among proteins down-regulated after cold stress, we could identify some key Krebs cycle enzymes (isocitrate dehydrogenase, malate dehydrogenase), together with many photosynthesis-related proteins (oxygen-evolving complex proteins, ATP synthase subunits, ferredoxin NADPH oxidoreductase and some Calvin cycle enzymes). Physiological and biochemical parameters (such as shoot apex dissection, chlorophyll, proline and sugar content determination) sustained proteomics findings allowing the present research to contribute to the current knowledge on these long-term responses, which may be crucial to stress adaptation under field conditions.     

Liquid and gas chromatography coupled to isotope ratio mass spectrometry for the determination of 13C-valine isotopic ratios in complex biological samples

On-line gas chromatography-combustion-isotope ratio mass spectrometry (GC-C-IRMS) is commonly used to measure isotopic ratios at natural abundance as well as for tracer studies in nutritional and medical research. However, high-precision (13)C isotopic enrichment can also be measured by liquid chromatography-isotope ratio mass spectrometry (LC-IRMS). Indeed, LC-IRMS can be used, as shown by the new method reported here, to obtain a baseline separation and to measure (13)C isotopic enrichment of underivatised amino acids (Asp, Thr-Ser, Glu, Pro, Gly, Ala, Cys and Val). In case of Val, at natural abundance, the SD(delta(13)C) reported with this method was found to be below 1 per thousand . Another key feature of the new LC-IRMS method reported in this paper is the comparison of the LC-IRMS approach with the conventional GC-C-IRMS determination. To perform this comparative study, isotopic enrichments were measured from underivatised Val and its N(O, S)-ethoxycarbonyl ethyl ester derivative. Between 0.0 and 1.0 molar percent excess (MPE) (delta(13)C= -12.3 to 150.8 per thousand), the calculated root-mean-square (rms) of SD was 0.38 and 0.46 per thousand and the calculated rms of accuracy was 0.023 and 0.005 MPE, respectively, for GC-C-IRMS and LC-IRMS. Both systems measured accurately low isotopic enrichments (0.002 atom percent excess (APE)) with an SD (APE) of 0.0004. To correlate the relative (delta(13)C) and absolute (atom%, APE and MPE) isotopic enrichment of Val measured by the GC-C-IRMS and LC-IRMS devices, mathematical equations showing the slope and intercept of the curves were established and validated with experimental data between 0.0 to 2.3 MPE. Finally, both GC-C-IRMS and LC-IRMS instruments were also used to assess isotopic enrichment of protein-bound (13)C-Val in tibial epiphysis in a tracer study performed in rats. Isotopic enrichments measured by LC-IRMS and GC-C-IRMS were not statistically different (p>0.05). The results of this work indicate that the LC-IRMS was successful for high-precision (13)C isotopic measurements in tracer studies giving (13)C isotopic enrichment similar to the GC-C-IRMS but without the step of GC derivatisation. Therefore, for clinical studies requiring high-precision isotopic measurement, the LC-IRMS is the method of choice to measure the isotopic ratio.